| Electrical characteristics | | | Testing | | Impedance | 50 Ohms | | Frequency range | 141 "& .085" Diameter copper shell
Of semi-steel cable for the 0-18GHz
Soft cable for :0-12 .4 GHz | Voltage
RG-55,58,141,142,
223,303:
RG-122,174,188,316: | Up to 500 volts
Up to 375 volts | Dielectric Withstand Voltage
.141"& RG-58 :
.085" & RG-316 :
| 1000 VRMS
750 VRMS | VSWR (Voltage Standing Wave Ratio)
Straight connector
Curved connectors
Straight connector
Curved connectors | RG-196/U series
1.30 +.04f(GHz)
1.45 + 06f(GHz)
RG-188/U series
1.25+.04f(GHz)
1.35 + .04f(GHz) | VSWR (Voltage Standing Wave Ratio)
(Straight connector)
(Curved connector)
Weaving to the main network | .141"Shell diameter of copper cable for
1.05 + .005 f (GHz)
RG-55 :
1.15 + .011 f (GHz)
RG-122 :
1.15 + .02 f (GHz)
RG-178 :
1.20 + .025 f (GHz)
| .141"Shell diameter of copper cable for
1.10 + .01 f (GHz)
RG-55 :
1.15 + .02 f (GHz)
RG-122 :
1.15 + .03 f (GHz)
RG-178 :
1.20 + .03 f (GHz) | Conductor resistance
Center conductor:
Main:
Weaving to the main network: | 2.0 milliohms
2.0 milliohms
0.5 milliohms | | Insulation Resistance | 5000 megohms
| RF leakage | -60dB minimum | Insertion loss | .03 dB max. |
| | Mechanical properties | | Testing | | Match | Quick Connect 50 Ohms | Torque to match
Minimum:
Recommended for:
The largest are: | 2 inch pounds 22N.cm
7 to 10 inch pounds 80-110 N.cm
15 inch pounds 170 N.cm
| Coupling nut retention
Axial force:
Torque:
Plug: | 100 lbs. min.,300 N.cm
15 in.lbs.min. 76 N.cm
N/A | Cable connector to
Fixed mode | Press-fit type and welding type | | With the center conductor of the cable to connect a fixed way | Unless otherwise specified, the use of welding | | Center needle thrust | Unless otherwise specified, apply to all types of | | Cable retention | Clamp type for RG-58, .141, 303 = 60 lbs min.;
for RG-55, 142, 223 = 80 lbs min. 400 N.cm | | Connector durability | 500 minimum for each drawing cycle 12 cycle @ |
| Material properties | | Parts Name | Testing | | The main, coupling nuts and other metal parts (except as otherwise provided) | Anti-magnetic stainless steel | Center conductor | Beryllium copper, heat treatment | Plating:
Other metal parts | Gold-plated or passivated to meet the MIL-C-39012
Standard surface treatment and corrosion requirements of | | Insulator | TFE fluorocarbon | | Washers | Silica | | Nut washer | Stainless steel, with the gear design, waterproof wall connector | | Press-fit bushing | Seamless brass alloy | | |
|
